Když přestaneš ROM aktualizovat, nebudeš mít v systému aktuální bezpečnostní záplaty.
Přešel jsem zpět na stock rom tak že jsem to už neřešil, ale ted jsem nainstaloval poslední týdení verzi a bohužel to nefunguje jak říkáš :( At změním tapetu na jakoukoliv barvu, stále mám google aplikace podbarvené růžově... na stock rom to neděláPre zobrazenie URL sa musíte prihlásiť píše: Pre zobrazenie URL sa musíte prihlásiťpřed 1 rokem- Podbarvení Google aplikací je podle použité tapety, je to vlastnost androidu 12 (Meterial You). Změň tapetu změní se podbarvení.
fastboot flash recovery twrp-3.6.2_9-0-ginkgo.img
fastboot reboot recovery
fastboot boot twrp-3.6.2_9-0-ginkgo.img
fastboot reboot recovery
fastboot reboot recovery
C:\Záloha E\Různé\Xiaomi\TWRP Willow 02>fastboot devices
18e4644e fastboot
C:\Záloha E\Různé\Xiaomi\TWRP Willow 02>fastboot flash recovery twrp.img
target reported max download size of 804276224 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.547s]
writing 'recovery'...
OKAY [ 0.283s]
finished. total time: 1.830s
C:\Záloha E\Různé\Xiaomi\TWRP Willow 02>fastboot reboot recovery
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address. default: 0x10000000
-n <page size> specify the nand page size. default: 2048
-S <size>[K|M|G] automatically sparse files greater than
size. 0 to disable
fastboot boot twrp.img